Scart
Sport catalysts 200cc - 996 3.6L
Sport catalysts 200cc - 996 3.6L
Compatibilité : 996
Couldn't load pickup availability
200-cell Sport Catalysts for Porsche 996 3.6L
Optimize the performance and sound of your Porsche 996 3.6L with our 200-cell sport catalysts. Designed as a direct replacement for your original catalysts, they significantly improve exhaust flow, delivering a noticeable power gain and a sportier sound.
Key Benefits:
- Increased performance: Benefit from a gain of approximately +12hp on a stock 996, thanks to our 200cc sports metal catalysts.
- Optimized Sound: Unleash your engine's sonic potential with improved exhaust flow.
- Perfect compatibility: Specifically adapted to the 996 3.6L with its 4 Lambda sensor sockets.
- Simplified installation: Designed for "plug & play" installation in place of the original, without any modification. The interfaces, inputs, outputs and dimensions are consistent with the original part.
Included for Easy Assembly:
- The catalyst straps.
- A complete assembly kit: gaskets, stainless steel screws, all-stainless steel lock nuts and high-temperature copper grease.
These catalysts are mounted between the manifolds and the rear mufflers. The average installation time is approximately 3 hours. The use of a lift is recommended. It is recommended to plan for the potential replacement of the sleeves and lambda sensors for optimal installation.
Detailed description
Detailed description
These 200cc sports catalysts fit:
> The 996 3.6L
This version is equipped with 200cc metallic sport catalysts. They therefore allow the replacement of the original catalysts, providing better flow and more sound. The power gain is 12hp on a stock 996. This version has 4 Lambda sensor sockets compared to only 2 for the 3.4L.
We also have in our range:
> A standard catalyzed version at 400cc - (Reference: SCA 996 3.6L 2 1)
Our exhausts all have the original interfaces, meaning their inlets, outlets, and dimensions are consistent with the original part. They can therefore be installed in place of the original part without any modification. Catalyst straps are included.
These catalysts are mounted under the car between the manifolds and the rear mufflers. To remove the original catalysts, it is recommended to disconnect the 4 Lambda sensors at the inlets and remove them once the catalysts have been removed. It is also often necessary to cut the sleeves at the catalyst outlet using a grinder. Provide original replacement sleeves.
The average installation time, including removal of the original exhaust, for this exhaust is 3 hours. Installation time may be faster if the exhaust to be removed is in good condition, but it may be longer if it is not.
Using a lift is essential. Recovering the original Lambda sensors is not easy; plan to replace them or be able to purchase new ones if necessary.
Tightening the nuts should always be done gradually across all the nuts.
To ensure that all our exhausts are fitted in the best possible conditions, we include in the price of this exhaust a fitting kit with gaskets, stainless steel screws, all-stainless steel lock nuts and high-temperature copper grease.
2.5.0.0
Share
