Scart
Exhaust valved - Porsche 911 (996 Turbo)
Exhaust valved - Porsche 911 (996 Turbo)
Listen to the sound signature
A/B comparison - same take, valves toggled.
Porsche 911 (996) · static revs
Porsche 911 (996) · static revs
A Scart exhaust is felt in the chest as much as it's heard. This clip only carries the audible dimension - the physical vibration is missing.
All 996 sounds →Couldn't load pickup availability
Fits: Porsche 996 Turbo (switch-operated).
It took us 8 years and more than sixty prototypes to reach our goal: a meaningful sound with no resonance. The valve exhaust lets you switch from a soft sound to a very sporty one at the press of a switch. With turbo engines the sound builds under load: at a standstill it stays discreet. All accessories are included (electrical and air harnesses).
Fitting
- Strictly original interfaces (inlets, outlets, dimensions): direct replacement of the original part
- Mounts directly after the turbos
- Fitting time: 8 hours including removal of the original exhaust (quicker if the old exhaust is in good condition). No need to remove the rear bumper
- A lift is essential
- Tighten all nuts progressively once the exhaust is fully in place
- Fitting kit included: straps, gaskets, stainless bolts, stainless lock nuts, high-temperature copper grease
Also in our range for the 996 Turbo
- Sport version - Reference: SCA 996T 2 2
- Remote-controlled valve version - Reference: SCA 996T 2 2 VT
Description détaillée
Description détaillée
This exhaust fits on:
> 996 Turbo (switch control)
The valved exhaust allows you to switch from a smooth sound to a very sporty sound at the flick of a switch. All accessories are included (wiring and air looms). It took us 8 years and more than sixty prototypes to achieve our goal, which is to say a significant sound without resonance. With turbo engines, the sound develops more when the engine is loaded, so when stopped, the sound remains discreet.
We also have the following mufflers in our range:
> A sports version - (Reference: SCA 996T 2 2)
> A version with valves controlled by remote control - (Reference: SCA 996T 2 2 VT)
Our exhausts all have the original interfaces, meaning that their inlets, outlets and dimensions are consistent with the original part.
This exhaust is mounted directly after the turbos.
The installation time for this exhaust, including removal of the original exhaust, is 8.0 hours. Installation time may be faster if the exhaust to be removed is in good condition, but it may be longer if it is not. Removal of the rear PC is not necessary. The use of a lift is essential. The nuts must always be tightened gradually on all the nuts after the exhaust is fully installed.
To ensure the best possible assembly of all our exhausts, we include in the price of this exhaust a mounting kit with straps, gaskets, stainless steel screws, all-stainless steel lock nuts and high-temperature copper grease. We recommend applying copper grease to the screw threads and the joint faces.
Partager
hand-polished
by hand
Scart workshop
parts and craft