These mufflers fit :
> All the 993 Turbo
For the 993 Turbo the muffler gives 70% of the sound (the remaining 30% comes via the catalytic converters). This version with valves enables you to choose between a discreet sound, and a very sporty sound. With this version the valve is controlled by a switch. If you prefer the version with remote control (Reference 993T 3 2 VT), click on the arrow to go back a page and select the last muffler in the list. Marry this muffler up with a sport catalytic converter and the sound will be just amazing when the valves are open.
Our range also includes the following mufflers:
> A sport version - 5Reference : SCA 993T 3 2)
> A RIVA version - (Reference : SCA 993T 3 2 RIVA) Best Seller
Our exhausts all fit onto the original interfaces. By this we mean their entry, their outlet and their size are the same as those of the original part.
These mufflers fit straight onto the catalytic converters.
On average they take about 8 hours to fit, including the time it takes to remove the original exhaust, to fit the wiring harness and air tubes. It will be faster if the exhaust you're removing is in good condition, just as it may take longer if the reverse is true. There is no need to remove the rear bumper. However, you will need to use a car hoist as the mufflers need to be removed from underneath.
Remember that the bolts must always be tightened progressively across the whole set of bolts.
To ensure that our exhausts are fitted under the best conditions, a mounting kit containing: stainless steel bolts, stainless steel lock nuts and high temperature copper grease, is included with your exhaust. If your original muffler was Gillet style, you will need to contact Porsche and order 2 olive ring gaskets and 2 clamps for Bischoff mufflers. We recommend that you use the copper grease on the thread of the bolts and in the gaskets at both ends of the muffler when fitting.