These tail-pipes fit :
> The 996 4S
These Turbo Look dual tail-pipes nestle into the bumper of the 996 4S. They do not affect the sound.
Should you wish to retain the original tail-pipes, we offer a polishing service that will bring them up as good as (or better than) new. The process involves 3 stages: firstly they are stripped down to remove the impurities, then polished mechanically and finally a protection is applied.
Our range of tail-pipes also includes the following reference for the 4S:
> A dual version - (Reference : SCA 9964S 4 2)
Our exhausts all fit onto the original interfaces. By this we mean their entry, their outlet and their size are the same as those of the original part.
These tail-pipes fit straight onto the mufflers.
On average they take about 30 minutes to fit, including the time it takes to remove the original exhaust.
You do not necessarily need to use a car hoist, however it makes life much easier when you're aligning the tail-pipes.
To ensure that our exhausts are fitted under the best conditions, a mounting kit including: washers, stainless steel bolts, stainless steel lock nuts and high temperature copper grease, are included in the price of this exhaust. We recommend that you use the copper grease on the thread of the screws when fitting.