These mufflers fit :
> All the 993 Turbo
This is our sport version for the 993. This exhaust gives a sound that is greater than the original without overdoing it. It can be fitted along with our sport cats.
Our range also includes the following mufflers:
> A RIVA version - (Reference : SCA 993T 3 2 RIVA) Best Seller
> A version with valves - (Reference : SCA 993T 3 2 VI or VT)
Our exhausts all fit onto the original interfaces. By this we mean their entry, their outlet and their size are the same as those of the original part.
These mufflers fit between the cats and the tail-pipes behind the fenders.
On average, they should take about 2 hours to fit, including the time taken to remove the original exhaust. It will be faster if the exhaust you're removing is in good condition, just as it may take longer if the reverse is true. There is no need to remove the rear bumper. However, you will need to use a car hoist as the mufflers need to be removed from underneath.
Remember that the bolts must always be tightened progressively across the whole set of bolts.
To ensure that our exhausts are fitted under the best conditions a mounting kit containing: gaskets, stainless steel bolts, stainless steel lock nuts and high temperature copper grease, is included with your exhaust along with the pair of straps. We recommend that you use the copper grease on the thread of the bolts and on the olive ring gaskets when fitting.