This muffler fits the G type 911 :
> 911 2.7L
> 911 3.0L
For these cars, the muffler gives 80% of the sound (the remaining 20% comes via the pre-muffler). We offer 3 different mufflers for this car in order to satisfy all your tastes.
This sport version has the traditional 911 muffler shape. We call it "banana" whereas English-speakers call it a "sausage" or "hot dog"! Its sound brings volume and depth to the flat 6. This is an intermediate version between the RIVA type sport version and the original exhaust.
Our range also includes the following solutions:
> A sport version with valves - (Reference : SCA 911 3 2 VI or VT)
> A sport version - RIVA type super sound - (Reference : SCA 911 3 2 +)
Our exhausts all fit onto the original interfaces. By this we mean their entry, their outlet and their size conform to the original part. This muffler fits several centimeters further back into the rear bumper to enable a better cooling. It is fitted with its own specific support which we supply with the exhaust. This support replaces the original one.
This muffler fits directly after the pre-muffler.
On average the fitting time is 1 hour, including the time taken to dismount the original exhaust. Fitting time will be faster if the exhaust you're dismounting is in good condition, just as it may take longer if the reverse is true.
It is preferable but not essential to use a car hoist.
Dismounting the original exhaust is fairly easy. If the 3 bolts of the entry flange are badly damaged by rust, you may need to use a grinder.
Tightening of the bolts must always be done progressively across the whole set of bolts..
To ensure that our exhausts are fitted under the best conditions, a mounting kit including: gaskets stainless steel bolts stainless steel lock nuts, high temperature copper grease as well as the 2 straps. We recommend using the copper grease on the bolt threads and the gaskets when fitting the exhaust.
Gain Vs Original: 9.5 Kg