This sport muffler fits :
> All the 911 from 1963 to 1973
This muffler is the latest addition to our range and has been developed in response to demand from our American customers. All our experience has been brought into play with this development, be it with regards to the air flow (always more complicated when you have two tail-pipes) or with the design of the tail-pipes with their perforated interior, giving this exhaust its racing look. We have two versions of this exhaust - this is the sportier one. In addition to its racing look, it has a particularly sporty sound. Having said that, the sound level will be regulated according to your driving style. The straps are welded directly onto the muffler.
We have a number of other solutions in our range :
> A sport version - (Reference : SCA 911A 3 2)
> A super sound version - (Reference : SCA 911A 3 2 +) - BEST SELLER
> A sport version with twin centered 70mm diameter tail-pipes - (Reference : SCA 911A 3 2 C)
> A sport version with two tail-pipes left and right - (Reference : SCA 911A 3 2 D)
> A super sound version with two tail-pipes left and right - (Reference : SCA 911A 3 2 D +)
> A triple, long tail-pipe, 2.8L RSR style version - (Reference : SCA 911 2.8 RSR 3)
> A triple, short tail-pipe 3.0L RSR style version - (Reference : SCA 911 3.0 RSR 3)
> A dual sound version with switch controlled valves - (Reference : SCA 911A 3 2 VI)
> A dual sound version with remote controlled valves - (Reference : SCA 911A 3 2 VT)
This muffler fits under the car directly onto the headers and is fairly easy to fit.
On average, it should take you about an hour to fit this exhaust, including the time taken to dismount the original exhaust. Fitting may take longer if the bolts are corroded. Use of a car hoist is preferable but not essential.
Our exhausts all fit onto the original interfaces. By this we mean their entry, their outlet and their size conform to the original part. They can therefore replace an original muffler without requiring any modification.
Tightening of the bolts must always be done progressively across the whole set of bolts....
To ensure that our exhausts are fitted under the best conditions, a mounting kit containing: gaskets, stainless steel bolts, stainless steel lock nuts and high temperature copper grease, is included with your exhaust.