This sport muffler fits :
> All the 911 from 1963 to 1973
This is our disconnectable version for the classic 911. With its valves open, your engine will sing like a diva, giving a sound bringing to mind the racing cars of the 70s - even down to the flames coming out of the tail-pipes. With the valves closed, the car is well-behaved again whatever your driving style. The shape of the exhaust is similar to the sausage shape of the original version. We do offer another version which can be controlled by remote.
We have a number of other solutions in our range :
> A sport version - (Reference : SCA 911A 3 2)
> A super sound version - (Reference : SCA 911A 3 2 +)
> A sport version with twin centered 70mm diameter tail-pipes - (Reference : SCA 911A 3 2 C)
> A super sound version with twin centered 70mm diameter tail-pipes - (Reference : SCA 911A 3 2 C +)
> A sport version with two tail-pipes left and right - (Reference : SCA 911A 3 2 D)
> A super sound version with two tail-pipes left and right - (Reference : SCA 911A 3 2 D +)
> A triple, long tail-pipe, 2.8L RSR style version - (Reference : SCA 911 2.8 RSR 3)
> A triple, short tail-pipe 3.0L RSR style version - (Reference : SCA 911 3.0 RSR 3)
> A dual sound version with remote controlled valves - (Reference : SCA 911A 3 2 VT)
This muffler fits under the car directly onto the headers and is fairly easy to fit even if there is some extra work involved to put in the electrovalve and switch. We would advise you to entrust the job of fitting the exhaust to a Porsche specialist.
On average, it should take about 5 hours to fit this exhaust, including the time taken to dismount the original exhaust. Fitting may take longer if the bolts are corroded. Use of a car hoist is preferable but not essential.
Our exhausts all fit onto the original interfaces. By this we mean their entry, their outlet and their size conform to the original part. They can therefore replace an original muffler without requiring any modification.
Tightening of the bolts must always be done progressively across the whole set of bolts....
To ensure that our exhausts are fitted under the best conditions, a mounting kit containing: gaskets, stainless steel bolts, stainless steel lock nuts and high temperature copper grease, as well as the 2 straps, is included with your exhaust.
Scart Weight: 9.30 Kg
Gain Vs Original: 1.1 Kg